Tabla de contenido
Use
A
B
01
Using your induction hob
1. Touch the On/Off control "C". The hob will beep once and the zones will show "-" to indicate that standby mode.
NOTE: If you do not select a cooking zone and power level within one minute, the hob will switch off automatically.
2. Place a pan suitable for induction cooking on a cooking zone; ensure that the base of the pan and the cooking
surface is clean and dry.
3. Choose the zone using (A)
displayed.
4. Select the output using the power control (D) from 0-9 and cooking commences. You can modify this any time
during cooking.
POWER DOWN
Heating Zone
• If you don't choose a heat setting within 1 minute, the induction hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
When you have finished cooking
1. Select the cooking zone (A).
2. Alter the power output level (D) to zero.
NOTE: The hob will display "H" to show the cooking zone is too hot to touch.
This is due to the convection of heat generated in the pan transferring back to the cooking surface of the hob
during use and is perfectly normal.
Important
The display will flash with
• you have not placed a pan on the correct cooking zone
• the chosen pan is not suitable for induction cooking
• the pan is too small or not correctly centred on the zone
As a result the hob will automatically switch off after one minute.
Utilisation
Użytkowanie
C
and "0" will flash. If no power level is selected within 5 seconds, "–" will be
POWER UP
and the selected power output if:
Utilizare
Uso
E
F
Normal Power
1500 W
1200 W
1500 W
1200 W
Boost Power
2000 W
1500 W
2000 W
1500 W
22
Tabla de contenido
