Using Your Induction Hob - Cooke & Lewis CLIND60 Manual Del Usuario

01

Using your induction hob

1. Touch the On/Off control "C". The hob will beep once and the zones will show "-" to indicate that
standby mode.
Note: If you do not select a cooking zone and power level within one minute, the hob will switch
off automatically.
2. Place a pan suitable for induction cooking on a cooking zone; ensure that the base of the pan
and the cooking surface is clean and dry.
3. Choose the zone using (A)
will be displayed.
4. Select the power level by pressing the
5. The power level will start at 5.Pressing the "+" will count up the power levels from 5 to 9 in
numerical order. Pressing the "–" key will take the power straight from 9 to 0.
Heating Zone
• If you don't choose a heat setting within 1 minute, the induction hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
When you have finished cooking
1. Select the cooking zone (A).
2. Alter the power output level (D) to zero.
Note: The hob will display "H" to show the cooking zone is too hot too touch.
This is due to the convection of heat generated in the pan transferring back to the cooking surface of
the hob during use and is perfectly normal.
Important
The display will flash with
• you have not placed a pan on the correct cooking zone
• the chosen pan is not suitable for induction cooking
• the pan is too small or not correctly centred on the zone
As a result the hob will automatically switch off after one minute.
GLOA10302_200000019 3MM R.indd 35
and "0" will flash. If no power level is selected within 5 seconds, "–"
key (E) or
Normal Power
1500 W
1200 W
1500 W
1200 W
and the selected power output if:
key (D).
Boost Power
2000 W
1500 W
2000 W
1500 W
35
11/05/2017 16:02