Vibration Information; Intended Use - Worx WT463 Manual De Instrucciones

A weighted sound power
K & K
pA wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum)
determined according to EN 62841:
Cutting wood
Cutting steel
metal
The declared vibration total value and the
declared noise emission value have been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
10
The declared vibration total value and the
declared noise emission value may also be
used in a preliminary assessment of exposure.
WARNING: The vibration and noise
emissions during actual use of the
power tool can differ from the declared value
depending on the ways in which the tool is used
especially what kind of workpiece is processed
dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being
cut or drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool
and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and
if any anti vibration and noise accessories are
used.
And the tool is being used as intended by its
design and these instructions. .
This tool may cause hand-arm vibration
syndrome if its use is not adequately
Jigsaw
L : 98.4 dB(A)
wA
3.0 dB(A)
Vibration emission value
a = 5,074 m/s
h
Uncertainty K = 1.5 m/s²
Vibration emission value
a = 9,548 m/s
h
Uncertainty K = 1.5 m/s²
managed.
WARNING: To be accurate, an
estimation of exposure level in the
actual conditions of use should also take
account of all parts of the operating cycle such
as the times when the tool is switched off and
when it is running idle but not actually doing
the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
2
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in
2
anti vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
Hex key
Metal cutting blade
Wood cutting blade
Aluminum cutting blade
Parallel guide
Vacuum adaptor
We recommend that you purchase your
accessories from the same store that sold you
the tool. Refer to the accessory packaging for
further details. Store personnel can assist you
and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.

INTENDED USE

The machine is intended for sawing wood,
plastic, metal and building materials while
resting firmly on the workpiece. It is suitable
for straight and curved cuts with mitre angles
to 45°. The saw blade recommendations are to
1
1
1
1
1
1
EN