Vibration Information - Worx WX523 Manual Original

vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.

VIBRATION INFORMATION

(CUTTING TILE)
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
Cutting tile
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
16 it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
Lithium-Ion Cordless Circular Saw
ACCESSORIES
TCT 24T
Blade
HSS 44T
Blade
Abrasive
cutting
2
= 6.13m/s disc
h
Parallel
Guide
Vacuum
Adaptor
Hex Key
20V 2.0
Ah Li-Ion
battery
WA3551.1
1hr
charger
We recommend that you purchase your
accessories listed in the above list from the
same store that sold you the tool. Refer to the
accessory packaging for further details. Store
personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The tool is intended for ripping and cross-cutting
wood and other materials in straight cutting lines,
while resting firmly on the work piece.
ASSEMBLY AND OPERATION
BEFORE OPERATION
Removing the battery pack
Charging the battery
Installing the battery pack
ASSEMBLY
WX523 WX523.1
1 1
1 1
1 1
1 1
1 1
1 1
1 2
1 1
(WA3880) (WA3880)
Action
See Fig. A1
See Fig. A2
See Fig. A3
WX523.9
1
1
1
1
1
1
/
/
Figure
EN