Noise Information; Vibration Information; Assembly - Worx WG324E Manual De Instrucciones

*** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
SUGGESTED BATTERIES AND
CHARGERS
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store person-
nel can assist you and offer advice.

NOISE INFORMATION

A weighted sound pressure
K
pA
A weighted sound power
16
K
pA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value:
Uncertainty
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which the
tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
Cordless Pruning Saw
Type Capacity
WA3551 2.0Ah
WA3880 2.0A
L = 79 dB(A)
pA
L = 88.11 dB(A)
wA
a < 2.5 m/s
2
h
K = 1.5 m/s²
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
3 dB(A)
Plan your work schedule to spread any high vibration
tool use across a number of days.
3 dB(A)
INTENDED USE
• The mini pruning saw is intended for cutting only
wood and branches up to a diameter corresponding
to the length of the pruning saw guide bar.
• The mini pruning saw must be used at ground level
or from a suitable platform that is completely stable
and secure.
• During using, the mini pruning saw should be held
in both hands, right hand on the Grip Area and left
hand on the Secondary Grip Area.
• The mini pruning saw is intended for outdoor use
only.
• The mini pruning saw is not intended for any other
use.
• Mounting of parts on the mini pruning saw is
authorized only for original or manufacturer-
approved spare parts (chain guides or saw chains for
example) as well as for authorized chain guide / saw
chain combinations as indicated in the manual.
• The user is responsible for any accident resulting
from improper use or unauthorized modification of
the mini pruning saw.

4. ASSEMBLY

WARNING! Do not install the battery pack
before it has been completely assembled.
Always use gloves when handling the chain.
EN