MINOX BN 7x50 C Manual página 33

bracket (14) over the cap screw of the tripod
thread (7) and threading it through until the
loop is completely inserted behind the tripod
thread. Remove the lens cap from the objecti-
ve lens when you want to use your binoculars
and let it hang down. If you want to remove
the lens cap from your BN 7x50 C completely,
pull the loop of the lens cap bracket carefully
out from behind the tripod thread and pull the
loop off the cap screw of the tripod thread (7).
Inserting and changing the batteries
Your MINOX BN 7x50 C has a compass with a
display that can be illuminated in the dark at
the press of a button. For this the compass
requires two batteries of the type LR 43x2.
To insert or replace the batteries
proceed as follows:
1. Open the screw cap on the battery compart-
ment on the bottom of the binoculars by
turning it in counterclockwise direction
(Fig.1)
2. Take the old batteries out of the battery com-
partment. (Fig. 2) and insert two new batter-
ies of type LR 43 in the battery compartment
(pay attention to correct poling).
31