BMW Urban Hybrid E-Bike Instrucciones De Uso página 56

EN
7.5 Secondary information.
information displayed on the top right section of the LCD panel.
To change the displayed information, push the Power button
successively:
1. Total distance.
2. Total time.
3. Total average speed.
4. Trip distance.
6. Trip average speed.
7. Range (distance to go).
The distance to go is calculated using the riding conditions
during the last kilometer and the remaining battery charge.
Changing the assistance level will not change the distance to
go shown in that instant.
7.6 Reset.
Before every trip, the information can be reset to zero pushing the
Power and (-) buttons simultaneously during 3 seconds (b).
3 sec
RESET
b
7.7 Settings.
To enter the settings menu, push and hold the up (+) and down
(-) buttons simultaneously during 3 seconds (a). Then select the
desired item using the Power button, and change the values using
(+) or (-):
The following values can be adjusted:
1. Wheel size: Select the correct value corresponding to the
value corresponds to the wheel perimeter (in milimeters).
2. Units:
the units can be set to Km or Miles.
3. Battery capacity: Select the capacity corresponding to the
calculate the distance to go accurately.
To exit the Settings menu, push the Power button during 3 seconds (b).
3 sec
SETTINGS
a
3 sec EXIT
b