Display And Operation Control; Operation - BMW Urban Hybrid E-Bike Instrucciones De Uso

EN
6 DISPLAY AND OPERATION
CONTROL.
6.1 Display Unit and remote control.
display located at the left side of the handlebar (a). The display is
very intuitive and easy to use, and can control all the functions of
the E-Bike with only three buttons. All the information is clearly
displayed in the LCD screen of the display unit.
6.2 Operating buttons and display information
.
(b)
1. Power button.
2. (+) button.
3. (-) button.
6.3 LCD screen.
4. Instant speed.
6. Lights indicator.
a
7. Error message.
9. Assistance.
d e
b
a
c
f g h i
b

7 OPERATION.

7.1 Switching the unit On and Off.
during 3 second (c).
during 3 second.
Wait 3 seconds after switching on the system before applying
force on the pedals. During this period, the torque sensor
calibration takes place. Applying force on the pedals while
switching on the E-Bike will cause Error 14 (see Trouble
shooting chapter).
7.2 Push assistance.
The e-bike can be pushed without pedalling at a speed limited to a
the push assistance, push the up (+) button during 3 seconds (d)
and maintain. The motor will switch on and the e-bike will move
forward without using the pedals. To cancel the push assistance,
stop pushing the up (+) button.
3 sec ON
3 sec OFF
c
3 sec ON
d