Thermador PRD304GHC Instalación página 3

Mounting Anti-Tip Bracket (see page 12)
The floor mounted bracket shall be installed as follows:
1. Place bracket on floor in position shown in Figure
above.
• 30" and 36" bracket may be used in either corner of
the installation area.
2. Secure to floor and wall stud using the (4) 1½" (38 mm)
Phillips head screws provided.
3. Later, when the unit is installed, the adjustable leg will
slide under the bracket, as shown in Figure below.
4. If the range is moved to a new location, the Anti-Tip
Device must be removed and reinstalled.
English 2
Optional Backguard Installation
(See page 18 for Dual Fuel models. See
page 16 for Gas models.
9" Low
Model
Back
30" PA30GLBH
36" PA36GLBH
48" PA48GLBH
)
22" High 3" Flush
Shelf Island Trim
Included with
PA30GHSH
range
Included with
PA36GHSH
range
Included with
PA48GHSH
range