Statement 43-Jewelry Removal Warning; Statement 48-Stacking The Chassis Warning; Statement 122-Exposed Dc Power Wire Warning; Statement 191-Vcci Class A Warning For Japan - Cisco ASR 920 Serie Manual Del Usuario

Statement 43—Jewelry Removal Warning
Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and
watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld
the metal object to the terminals.
Statement 48—Stacking the Chassis Warning
Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and equipment
Warning
damage.
Statement 122—Exposed DC Power Wire Warning
Warning An exposed wire lead from a DC-input power source can conduct harmful levels of electricity. Be sure that no
exposed portion of the DC-input power source wire extends from the connector(s) or terminal block(s).
Statement 191—VCCI Class A Warning for Japan
This is a Class A product based on the standard of the VCCI Council. If this equipment is used in a domestic
Warning
environment, radio interference may occur, in which case, the user may be required to take corrective actions.
Statement 206—Exposed Circuitry Warning
Warning Do not reach into a vacant slot when installing or removing a module. Exposed circuitry is an energy hazard.
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
4
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
OL-32476-01 Rev. V4