en | 7 | T40092
1 General Information
Product name:
Product type:
Product number:
Weight:
Max. load capacity:
Static test coefficient:
Intended Use:
The engine support supplemental set (called
supplemental set in the following) serves for
supporting various units located in the vehicle in
accordance with the workshop manuals of the
Volkswagen Group brands.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Only use for loads in accordance with the "load
capacity of the tools" table.
The supplemental set can only be used with the
special tools specified in the workshop manuals of
the Volkswagen Group brands.
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
2018-06-25
Engine support device
supplemental set
Load holding device
T40092
7.9 kg
See "Load capacity of the
tools" table
3.0
Figure 1:
Engine support device supplemental set T40092
1
Connector T40092/4 (2 pieces)
2
Hexagon screw M10x25, 8.8 (2 pieces)
3
Locking pin with knot chain and spring plug (2 pieces)
4
Hexagon flange screw M10x30, 10.9 (4 pieces)
5
Counter bearing left T40092/2
6
Hexagon screw M10x25, 8.8 (2 pieces)
7
Traverse T40092/1
8
Counter bearing right T40092/3
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Capítulos
