English; General Safety Instructions; Safety Instructions For Saw Stands - Bosch GTA 3800 Professional Manual Original

Anwendungsberatung:
Tel.: (0711) 40040460
Fax: (0711) 40040462
E-Mail: [email protected]
Weitere Serviceadressen finden Sie unter:
www.bosch-pt.com/serviceaddresses
Entsorgung
Arbeitstische, Zubehör und Verpackungen sollen einer um-
weltgerechten Wiederverwertung zugeführt werden.

English

Safety Instructions

General Safety Instructions

Read all the warnings and instructions in-
cluded with the saw stand or the power tool
you intend to mount on it. Failure to observe
the safety information and follow instructions
may result in electric shock, fire and/or serious
injury.

Safety Instructions for Saw Stands

Read all the warnings and instructions in-
cluded with the saw stand or the power tool
you intend to mount on it. Failure to observe
the safety information and follow instructions
may result in electric shock, fire and/or serious
injury.
Disconnect the plug from the power source and/or re-
u
move the battery from the power tool before making
any adjustments to the power tool or changing ac-
cessories. Accidents can occur when power tools are
started unintentionally.
Assemble the saw stand properly before mounting the
u
power tool. Correct assembly is important to prevent the
risk of collapsing.
Firmly secure the power tool to the saw stand before
u
using it. You may lose control of the power tool if it slips
on the saw stand.
Place the saw stand on a firm, flat, horizontal surface.
u
If there is a chance that the saw stand will slip or wobble,
the safe and steady machining of the workpiece cannot
be guaranteed.
Do not overload the saw stand or climb or stand on it.
u
Overloading or standing on the saw stand can raise its
centre of gravity, causing it to tip over.
Do not force the workpiece into the saw blade. Exert-
u
ing excessive pressure on the power tool can cause the
saw stand to tip over.
Bosch Power Tools
Ensure that all screws and connecting pieces are
u
tightly fastened when carrying out work. Loose con-
nections can cause instability and inaccurate sawing.
Ensure that long and heavy workpieces do not unbal-
u
ance the saw stand. The free end of long and heavy
workpieces must have something placed underneath it or
be supported.
When pushing together or pulling apart the saw stand,
u
do not put your fingers near the points of articulation.
There is a risk of fingers being crushed.
Disconnect the plug from the power source and/or re-
u
move the battery from the power tool before making
any adjustments to the power tool or changing ac-
cessories. Accidents can occur when power tools are
started unintentionally.
Assemble the saw stand properly before mounting the
u
power tool. Correct assembly is important to prevent the
risk of collapsing.
Firmly secure the power tool to the saw stand before
u
using it. You may lose control of the power tool if it slips
on the saw stand.
Place the saw stand on a firm, flat, horizontal surface.
u
If there is a chance that the saw stand will slip or wobble,
the safe and steady machining of the workpiece cannot
be guaranteed.
Do not overload the saw stand or climb or stand on it.
u
Overloading or standing on the saw stand can raise its
centre of gravity, causing it to tip over.
Ensure that all screws and connecting pieces are
u
tightly fastened during transport and when carrying
out work. The holder sets for the power tool must al-
ways be securely locked. Loose connections can cause
instability and inaccurate sawing.
Only install and remove the power tool when it is in
u
the transport position (for information on the trans-
port position, also refer to the operating instructions
for the relevant power tool). Otherwise the power tool
may have an such unfavourable centre of gravity that you
will not be able to hold onto it securely.
Operate the power tool fastened to the holder set only
u
on the saw stand. Without the saw stand, the holder set
with the power tool is not secure and can tilt.
Ensure that long and heavy workpieces do not unbal-
u
ance the saw stand. The free end of long and heavy
workpieces must have something placed underneath it or
be supported.
When pushing together or pulling apart the saw stand,
u
do not put your fingers near the points of articulation.
There is a risk of fingers being crushed.
Symbols
The following symbols may provide you with important in-
formation about the use of your saw stand. Please take note
of these symbols and their meaning. Knowing what these
symbols mean will help you to use your saw stand more ef-
fectively and more safely.
English | 15
1 609 92A 6JA | (22.04.2021)