en | 7 | T10416
1 General Information
Product name:
Product type:
Product number:
Weight:
Max. load capacity:
Static test coefficient:
Intended Use:
The engine support serves for holding the engine
and gearbox unit of the 4 cylinder injection engine
(1.2 l and 1.4 l direct injector with turbocharger) in
accordance with the workshop manuals of the
Volkswagen Group brands.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Use only for loads up to 285 kg.
Only use in connection with a suitable engine and
gearbox jack (e.g. VAS 6931/V.A.G. 1383A) (see
workshop manuals of the Volkswagen Group
brands).
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Only use on level, horizontal and weight-bearing
ground.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
2018-06-15
Engine support
Load holding device
T10416
10.8 kg
285 kg
3.0
Figure 1:
Engine support T10416
1
Base plate
2
Bolt T10416/3
3
Hexagon screw M10 x 25, 8.8
4
Hexagon nut ISO 4032-M10-8
5
Bolt T10416/2
6
Hexagon screws M12 x 35, 8.8 and spring ring (2 pieces)
7
Hexagon screw M10 x 35, 8.8 and spring ring
8
Bolt T10416/1
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Capítulos
