Taurus FASTWAVE 23 DIGITAL Manual Del Usuario página 8

English
Microwave
Fastwave 23 Digital
Fastwave 25 Digital
DESCRIPTION
A Door
B Handle
C Command panel
D Digital display
E Configuration buttons
F Turntable
G Turntable wheels
H Grill Rack
1 Function Selector
2 ECO button
3 Clock button
4 Defrost and Autoclean button
5 Pause/Stop button
6 Start button
7 Turning knob
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Fully extend the appliance's power cable before
each use.
- Do not use the appliance when empty.
- Do not use the appliance if the on/off switch
does not work.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Make sure that dust, dirt or other foreign ob-
jects do not block the fan grill on the appliance.
- Use the appliance and its accessories and
tools in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use the appliance
for operations different from those intended
could result in a hazardous situation.
- CAUTION: Do not use the appliance if the
glass is cracked or broken.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Do not cover or obstruct any of the openings of
the appliance.
- The plug must be easily accessible so it can be
disconnected in an emergency.
- Check the oven for any damage, such as mis-
aligned or bent door, damaged door seals and
sealing surface, broken or loose door hinges
and latches and dents inside the cavity or on
the door. If there is any damage, do not operate
the oven and contact qualified personnel.
- Do not place anything over the Microwave.
- Keep the oven separated about 20cm for each
side and 30cm on behind to ensure the correct
ventilation.
PLATE MOUNTING
- Remove all carton and plastic from the inside
of the appliance.
- Place the plate wheels (G) in the internal cavity
of the Microwave oven by assuring that they
stay inside of the hole on the interior base.
- Place the plate over the wheels by matching
the center with the internal piece connected to
the motor.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Prepare the appliance according to the function
you wish to use:
SETTING UP THE CLOCK:
- On connecting the microwave for the first time
the digital screen will display "1:00" To adjust to
the function you wish to use:
- Press the clock selector button. Turn the Timer
control in order to set the hours.