Information For The Purchaser; Setting Up And Installation; Setting Up; Electrical Connection - Renfert Millo Manual De Instrucciones

Information for the purchaser

Instruct operators on the appli-
cation, possible hazards during
use and operation of the Millo /
Millo pro arch trimmer based on
the user information.
Ensure that this user information is avail-
able to operators.
Further information is included in the sec-
tion:
"Information for the purchaser"
at the end of these instructions.

1. Setting up and installation

1.1 Setting up

• Place the unit on a stable, flat work-
bench.
• Position the unit so that the mains plug is
easily accessible.

1.2 Electrical connection

• Ensure that the voltage corresponds to
the voltage on the rating plate of the unit.
• Plug in the unit.

1.3 Connecting the extractor

The Millo / Millo pro must be
operated with an extractor.
The minimum air flow volume of
the extractor must be 2040 l/h.
• Attach the extractor hose to the connec-
tor on the unit (Fig. 6).
EN
Operating instructions
- 2 -
1.3.1 M
illo pro
The Millo pro has a plug-in socket.
This plug-in socket has an electrical cur-
rent when the Millo pro is switched on so
that an extractor can be operated directly
with it.
Do not exceed the connected
load for the plug-in socket.
The plug-in socket should only
be used for connecting an ex-
tractor.
Connecting other electrical units
to the plug-in socket could dam-
age the Millo pro.
• Plug the extractor into the plug-in socket
on the back of the Millo pro (Fig. 7).
Section D.1 at the end of these instruc-
tions offers information concerning electri-
cal systems employing different power
plug designs.
The Millo / Millo pro is now ready for

operation.