Automatic Cleaning With The Pyrolytic Function - SCHOLTES BIG CAVITY Manual De Instrucciones

Automatic cleaning with the PYROLYTIC
function
With the PYROLYTIC mode, the internal temperature
of the oven reaches 500°C. The pyrolytic cycle is
activated, burning away food and grime residues.
Dirt is literally incinerated.
Keep children away from the appliance during the
automatic cleaning cycle as surfaces may become
very hot. Particles may ignite inside the oven due to
the combustion process. There is no cause for
concern: this process is both normal and hazard-
free.
Before initiating the PYROLYTIC mode:
! We recommend the duration of the first automatic
cleaning cycle is set to 120 minutes.
! The oven should be cold. If the oven is too hot, the
pyrolytic cycle may not start. Wait for the oven to
cool down.
• Remove large or coarse food residues from the
inside of the oven using a damp sponge. Do not use
detergents.
• Remove all accessories.
• Remove the DIVIDER.
• Do not place tea towels or pot holders over the
oven handle.
! The programme may only be started once the oven
door has been closed.
To enable the PYROLYTIC cycle, turn the knob to
.
Press the button. The TIMER KNOB may be used
to select the desired cleaning level; there are three
default time settings which cannot be modified.
1. Economy (ECO): turn the knob towards "-".
Duration 1 hour.
2. Normal (NOR): initial level. Duration 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards "+".
Duration 2 hours.
4. Press the button to confirm.
An end time for the PYROLYTIC cycle (as for a
normal cooking cycle) may be programmed (see
Programming the automatic cleaning end time ).
Safety devices
• The icon on the display, when lit, indicates
that the oven door was automatically locked as soon
as the temperature reached a high value.
• If a malfunction occurs, the heating elements will
be switched off.
• Once the oven door has been locked, you cannot
change the duration and cycle end time settings.
Programming the automatic cleaning end time
1. Press the button until the
digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards "+" and "-" to
adjust the hour value.
3. Press the button again until the other two digits
on the DISPLAY begin to flash.
4. Turn the TIMER KNOB towards "+" and "-" to
adjust the minute value.
5. Press the button again to confirm.
6. When the set time has elapsed, the text END
appears on the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy
(ECO) PYROLYTIC level has been selected, with the
default duration of 1 hour. 12:30 is scheduled as the
end time. The programme will start automatically at
11:30 a.m.
Programming has been set when the
are illuminated. The display shows the PYROLYTIC
end time and duration alternately.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the
oven has cooled down sufficiently before you can
open the oven door. You will notice some white dust
deposits on the bottom and the sides of your oven;
remove these deposits with a damp sponge once
the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in
which case it is not necessary to remove the
deposits, they are completely harmless and will not
affect your food in any way.
GB
icon and the two
and icons
25