Installation-Additional Components; Continuous Cord Loop Tension Device - Levolor Cellular Shades Instalación

INSTALLATION–ADDITIONAL COMPONENTS
CONTINUOUS CORD LOOP CORD TENSION DEVICE
•
Continuous Cord Loop Shades will arrive with the tension device mounted
to the cord.
•
Use the included screws to secure the hold down tension device to the
mounting surface, ensuring that the cord loop is taut.
•
SEE WARNING LABEL ON SHADE
INSTALL THE TENSION DEVICE
•
Slide the cord tensioner down to the bottom of the cord loop.
•
Using the screws provided, attach the tension device to the wall, allowing
some slack for the cord to slide through easily.
IMPORTANT: When installing into drywall or plaster, use
anchors (size ⁄ ", not included) before inserting the screws. When installing in metal,
1
2
use appropriate anchors for metal material.
IMPORTANT: The tension device provides smooth operation of the shade. The
shade will not operate properly unless the tension device is installed.
WARNING: It Is imperative that the cord tensioner be properly
secured to the wall or window frame to reduce children's access to
!
the cord loop. Young children can strangle in cord loops. They can
also wrap cords around their necks and strangle.
Continuous Cord
Loop Tension Device
14
Continuous Cord Loop Lift Control
⁄ " drill bit and insert wall
3
16
Installing the Tension Device