12/24 Hour Time Display Setting; Calendar Setting - Technoline WS 2816 Manual De Instrucciones

Centro meteorológico profesional inalámbrico
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
2. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the hour.
Continually holding the key will increase the digit faster.
3. Press the SET key to switch to the minutes. The minute digit will start flashing.
4. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the minute.
Continually holding the key will increase the digit faster.
5. Press the SET key to confirm and to enter the 12/24 HOUR TIME DISPLAY
SETTING.

12/24 HOUR TIME DISPLAY SETTING

The time can be set to view as 12-hour or 24-hour format. The default time-display
mode is 24-h. To set to 12-h time display:
1. The 24h or 12h digit is flashing
2. Press the ▲UP ARROW key or ▼DOWN ARROW key to toggle the value.
3. Press the SET key to confirm and to enter the CALENDAR SETTING.
Remarque:
 24h time display format will show: Day/ Month/ Year
 12h time display format will show: Month/ Day/ Year

CALENDAR SETTING

The default date is 1. 1. of year 2009. The date will be updated automatically with the
date from the computer when the display is synchronized with the USB transceiver and
connected to the Heavy Weather Pro software. The date can also be set manually by
following the steps below.
1. The year digit starts flashing.
2. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the year. The
range runs from "00" (2000) to "99" (2099). Hold the key in to change the value
faster.
48
Tabla de contenido
loading

Tabla de contenido