A&D FZ-i Serie Guia De Inicio Rapido página 10

EN
Display Error code
Power supply voltage fault
The voltage supplied from the AC adapter is abnormal. Check if the
AC adapter is one provided with the balance.
EC, E00 Communications error
A protocol error occurred in communications.
Confirm the format, baud rate and parity.
EC, E01 Undefined command error
An undefined command was received.
Confirm the command.
EC, E02 Not ready
A received command cannot be processed.
e.g. The balance received a Q command, but not in the weighing
mode.
e.g. The balance received a Q command while processing a
RE-ZERO command.
Adjust the delay time to transmit a command.
EC, E03 Timeout error
If the timeout parameter is set to "
did not receive the next character of a command within the time limit
of one second. Confirm the communication.
EC, E04 Excess characters error
The balance received excessive characters in a command.
Confirm the command.
EC, E06 Format error
A command includes incorrect data.
e.g. The number of digits is incorrect.
e.g. The alphabet was included in the numerical value.
Confirm the command.
EC, E07 Parameter setting error
The received data exceeds the range that the balance can accept.
Confirm the parameter range of the command.
Description
10
", the balance