Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KMD-14
AUTORANGING MULTIMETER
NOTE: The value indicated in the display during the diode check is the
forward voltage.
NON-CONTACT VOLTAGE (NCV)
The NCV function works on any rotary switch position.
1.Test the detector on a known live circuit before use.
2.Hold the top of the meter very close to the voltage source as shown.
3.If voltage is present, the rim of the LCD display will flash a bright red and a
motor shaking will happen.
20
www.grupotemper.com
Tabla de contenido
