Temperature Measurements - koban KMD-14 Instrucciones Operativas

TEMPERATURE MEASUREMENTS

WARNING: To avoid electric shock, disconnect both test probes
from any source of voltage before making a temperature
measurement.
1. If you wish to measure temperature in
o
F range. If you wish to measure temperature in
o
switch to the C range.
2. Insert the Temperature Probe into the Temperature Socket, making sure
to observe the correct polarity.
3. Touch the Temperature Probe head to the part whose temperature you
wish to measure. Keep the probe touching the part under test until the
reading stabilizes (about 30 seconds).
4. Read the temperature in the display. The digital reading will indicate the
proper decimal point and value.
WARNING: To avoid electric shock, be sure the thermocouple has been
removed before changing to another measurement function.
www.grupotemper.com
AUTORANGING MULTIMETER
o
F, set the function switch to the
KMD-14
o
C, set the function
21