Maintenance And Cleaning - Würth master H 26-ACM Manual De Instrucciones

página de 102

/ 102
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

H 26 ACM.book Seite 10 Freitag, 25. November 2005 8:37 08

Inserting and removing tools

Only use the appropriate tools for the

SDS-plus® tool mounting.

Clean and lightly lubricate tools prior to use.

Insert the tool into the tool mounting while rotating it

until it engages.

Check that it has engaged by pulling on the tool.

Push the auto-locking sleeve 2 back to remove the

tool.

Replacing the Tool Holder (see figure C)

For removal of the tool holder, turn the locking

ring 3 to the unlock position

holder.

Clean any dust deposits from the spindle and the

tool holder and lightly lubricate with grease.

Insert the tool holder onto the spindle to the stop and

turn the locking ring to the lock position

The tool holder is locked when it can no longer be

pulled off of the spindle.

Drilling without impact drilling and

chipping

Fitting the tool.

Set the mode selector switch 6 to

Press the On/Off switch 9 to adjust the speed or

switch the machine on and off.

Chipping

Fitting the tool.

Set the mode selector switch 6 to

Turn the tool to the desired angle.

Set the mode selector switch to

Press the On/Off switch 9 to switch the machine on

or off or to set the speed.

Before any work on the machine itself, pull the

mains plug.

Keep the tool holder clean at all times.

Changing the Dust Protection Cap

A damaged dust protection cap should be changed

immediately. We recommend having this carried

out by an after-sales service.

If the machine should fail despite the care taken in

and take off the tool

manufacturing and testing, repair should be carried

out by a Würth Master-Service agent.

In all correspondence and spare parts orders,

please always include the 8-digit order number

given on the nameplate of the machine.

For the current spare parts list of this machine, log into

the Internet under "http://www.wuerth.com/parts-

manager" or ask for a copy at your nearest Würth

branch office.

Power tools, accessories and packaging should be

sorted for environmental-friendly recycling.

incorporation into national law, power tools that are

no longer suitable for use must be separately col-

lected and sent for recovery in an environmen-

tal-friendly manner.

Würth will gladly take back your defective Würth

power tool free of charge.