Optional Equipment - Motorola NNTN6899 Guia Del Usuario

Optional Equipment

A wall mount bracket (part number: NNTN6844) or charger
base tray (part number: NNTN7560) is available for the
Multi-Unit Charger. Contact your local dealer to order this
item. Installation is shown in the following image.
Mounting Multi-Unit Charger to Wall Bracket
Attach to wall in four
locations (fasteners not
provided)
1. Mount bracket to wall using appropriate fasteners in
four locations (fasteners not included in kit).
2. Install two M4x25 screws (included in kit) through
bracket into charger base as shown. Do not over
tighten the screws.
Mounting Multi-Unit Charger to Charger Base
Tray
1. Mounting holes are available at the back of Charger
Base Tray for direct mounting to wall surfaces.
2. Position the base tray in the desired position and mount
the base tray to wall using appropriate fasteners in four
locations (fasteners not included in kit).
M4x25 screw -
two locations
(provided)
11