Intended Use; Before You Start; Setting Up The Shredder Safely; Operating The Shredder - Olympia PS 38 CD Manual Del Usuario

Intended Use

The automatic shredder can shred paper and CDs inserted into the automatic insertion slots.
The material to be shredded must comply with the requirements stipulated in Technical Data.
The automatic shredder is not intended for shredding material which does not comply with the
requirements stipulated in the Technical Data (e.g. cardboard). Any other use is considered
unintended use.

Before You Start

Read this operating manual through carefully, observing all the information contained
regarding handling and using the shredder. Keep the operating manual in a safe place
for future reference.
The following information should help to ensure that the shredder always functions as you expect
it to.
Keep ties away from the shredder.
Keep long hair away from the shred-
der.
Keep all loose pieces of clothing,
jewellery or other loose items away
from the shredder.

Setting up the Shredder Safely

The shredder only operates when the waste bin supplied is fitted.
c
aution
underside of the cutting mechanism has sharp edges and corners. Do not take hold
of the shredder from the underside.
1
Place the shredder onto the waste bin. The shredder latches audibly in place.
2
Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily
accessible power socket.
3
Make sure the switch is set to its o
an easily accessible power socket.

Operating the Shredder

The shredder works using an automatic shredding mechanism. The optical sensor for automatic
infeed of material is in the centre of both insertion slots.
c
aution
touch the shredder on the underside when the shredder is in operation.
12
! Risk of injury through sharp edges on the cutting mechanism. The
ff
! Risk of injury through sharp edges on the cutting mechanism. NEVER
Never reach into the insertion slot.
Before starting to shred material, re-
move any staples, paper clips, rubber
bands or other foreign bodies from the
material concerned.
position and then connect the power adapter plug to