Menu Button; Vox Function And Its Sensitivity; Roger Beep: End Transmission Tone - Midland XT-30 Manual De Usuario

Menu button

The following functions can be selected by pressing the Menu button:
• VOX
• Roger Beep on/off
• Channel setting
• CTCSS tone setting
• Keypad Beep

VOX function and its sensitivity

The VOX function lets you open the transmission by voice without the use of
the PTT button.
Push the Menu button for three times; "VOX" blinks on the display. Select 'on'
by means of the ▲/▼ buttons and wait 3 seconds as confirmation.
To disable the VOX mode
Press the Menu button for three times. Select "OF" by means of the ▲/▼
buttons and then push PTT to confirm.
Attention: To use the VOX with the optional headset, move the small switch of
the headset to the VOX position. Move it back to PTT position if you don't use
the VOX function.

Roger Beep: End transmission tone

When the PTT is released the radio will beep to confirm to other users that
your transmission is finished. This feature is enabled by default.
To disable it:
Press the Menu button till the display shows "rb"
1.
2. Select "oF" by means of the ▲/▼ buttons.
3. Confirm your selection by pushing the PTT button.
8 | XT-30 instruction guide