Kenwood FPM800 Serie Instrucciones página 8

thermoresist blender
m
filler cap
n
lid
o
goblet
p
sealing ring
q
blade unit
r
filler cap vents
attachments
s
knife blade
t
dough tool
ck
dual whisk
cl
folding tool
cm
max capacity disc
cn
4mm slicing/grating disc
co
2mm slicing/grating disc
cp
extra fine grater disc
cq
fine Julienne disc
cr
mini bowl and blade
cs
citrus juicer
ct
attachment storage box
to use your food processor
1 Fit the bowl to the power unit. Place the handle towards the
back on the right hand side and turn clockwise
locks.
2 Fit an attachment over the bowl drive shaft.
Note: Detachable drive shaft
when using the discs, mini bowl, whisk, folding
tool and citrus juicer.
lways fit the bowl and attachment onto the processor
before adding ingredients.
3
3 Fit the lid - ensuring the top of the drive shaft/tool locates
into the centre of the lid.
The processor will not operate if the bowl or lid
are not fitted correctly into the interlock. Check
that the feed tube and bowl handle are situated
to the right hand side.
4 Plug in. The Power On light will come on and flash until the
bowl and lid are fitted correctly. Select one of the following
options: -
uto Button – the light will come on when the uto Button is
pressed and the optimum speed for the attachment will be
automatically selected.
Speed Control – manually select the required speed (refer to
the recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will
operate for as long as the control is held in position.
5 t the end of processing turn the speed control to the '0' off
position or if using the uto press the button and the light
will go out.
The Power On light will flash if either the lid or
bowl are not fitted or incorrectly fitted.
The uto Button will not operate if a speed is
selected on the speed control.
lways switch off and unplug before removing the
lid.
important
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
until it
2
should be fitted
Eco function
If the food processor is left plugged in for over 30 minutes
without being used, it will go into standby mode to reduce
energy consumption.
The Power On light will pulse slowly and the food processor
will not operate until one of the following actions are carried
out:-
The uto button is pressed.
The speed control is turned to a speed and then turned
back to the 'O' off position.
The light will change to being constantly lit when ready to
use.
Note: If the bowl or lid are not engaged into the interlock the
power on light will pulse more rapidly than the Eco function.
to use your thermoresist blender
p
1 Fit the sealing ring
seal is located correctly in the grooved area.
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Hold the underside of the blade unit
blades into the goblet - turn anti-clockwise until it clicks
Refer to the graphics on the underside of the blade unit as
follows:
- unlocked position
- locked position
The blender will not work if incorrectly
assembled.
3 Put your ingredients into the goblet.
4 Fit the lid to the goblet and push down to secure
filler cap.
5 Place the blender onto the power unit, and turn clockwise
6
to lock.
The appliance will not operate if the blender is
incorrectly fitted to the interlock.
6 Select uto, or a speed (refer to the recommended speed
chart) or use the pulse control.
hints
When making mayonnaise, put all the ingredients, except the
oil, into the blender. Remove the filler cap. Then, with the
appliance running, add the oil slowly through the hole in the
lid.
Thick mixtures, e.g. pâtés and dips, may need scraping down.
If the mixture is difficult to process, add more liquid.
Ice crushing - operate the pulse in short bursts until crushed to
the desired consistency.
The processing of spices is not recommended as they may
damage the plastic parts.
The appliance will not work if the blender is incorrectly fitted.
To blend dry ingredients - cut into pieces, remove the filler
cap, then with the appliance running, drop the pieces down
one by one. Keep your hand over the opening. For best
results empty regularly.
Don't use the blender as a storage container. Keep it empty
before and after use.
Never blend more than 1.6 litres (2 pts 8 fl oz) - less for
frothy liquids like milkshakes.
6
q
into the blade unit - ensuring the
q
and insert the
4
.
5
. Fit the