Pleasant Hearth VFL2-SO18DT Manual De Instrucciones página 16

INSTALLATION
GAS SELECTION INSTRUCTIONS
WARNING: This appliance can be used with propane or natural gas. It is shipped from the
factory adjusted for use with propane.
CAUTION: The knob to the gas selection means shall not be accessed or adjusted while the appli-
ance is in operation.
CAUTION: Two gas line installations at the same time are prohibited. The access plate to simple
switching means shall not be opened while heater is in operation.
Installation and adjustments shall be made by a qualified technician only.
NOTE: If you are connecting this appliance to propane do not make any adjustments. Proceed to
installing the gas line as instructed in the Owner's Manual.
Convert to natural gas:
Step 1 - Remove access panel
Step 2 - Adjust the gas selector valve
Push in on the selector valve Knob and rotate the knob
counter-clockwise until it stops. Release the knob (See Fig. 13)
Do not operate the appliance between locked positions.
Step 3 - Replace Access Panel
Reverse step 2 to convert back to propane gas.
Fig. 12 - Valve Access Panel
PROPANE
POSITION
LP
NG
16
Panel Screws (4)
Gas Selector Knob
Gas Selector Knob
NATURAL GAS
POSITION
LP
NG
Fig. 8 - Selector Valve
Fig. 13 - Selector Valve
Access Panel