Auto Dry Cycle (Hde/Hdg5000Aw, Chde5000Aw) - Haier HDE5000AW Manual Para El Usuario

English
AUTO DRY CYCLE
HDE/HDG 5000AW, CHDE5000AW
1. Press the power On/Off button to power on the dryer.
2. Set the cycle select dial to required auto dry cycle. The signal, temperature,
and dry levels are preprogrammed. To change this setting:
• Press the "Dry Level" button to select suitable drying level after powering on
the dryer. There are 3 options to choose from: More, Normal, or Less.
• Press the "Signal" button, and the buzzer will sound upon end of cycle.
• The user can choose from Louder, Softer, or OFF.
• Press the "Wrinkle Saver" button to select a suitable reserved drying
program.
• This convenient feature helps keep wrinkles from setting when you cannot
unload the dryer at the end of a cycle. The dryer will stop and then tumble
for a brief period every few minutes. Press the wrinkle saver button to
activate. Stop the setting at any time by pressing the wrinkle saver button
or opening the dryer door. This feature will work for 1 hour after the drying
program is complete.
• Press the "Anti Bacterial" button.
• This function can be selected only in certain cycles. Here the heat temp is
raised to the highest dry level. This option can only be used with heavy,
bulky items, white and normal cycle.
NOTE: Cannot use on delicate fabrics
• Press the "Damp Dry Signal" button.
• If activated the dryer will beep when the load is approximately 80% dry.
This will allow you to remove light weight or other items that you may wish
to iron.
• Press Start/Pause button.
• When starting the machine, close the door first, then press this button.
• If a pause is needed during drying, press this button. Pressing again will
resume operation.
29
Signal
*
*
*
*
*
*
Air Dry
Wrinkle
Anti
Damp
saver bacterial
signal