Ec Declaration Of Conformity; Safety Instructions; General Safety Rules - DeWalt DW872 Traducido De Las Instrucciones Originales

EN GLI SH
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW872
D WALT declares that these products described
E
under "technical data" have been designed in
compliance with: 2006/42/EC, EN 61029-1,
EN 61029-2-9.
These products also comply with Directives
2004/108/EC. For more information, please contact
D WALT at the following address, or refer to the
E
back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
E
Horst Grossmann
Vice President Engineering and Product
Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
23.10.2009

Safety Instructions

WARNING! When using electric tools
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and personal injury
including the following.
Read all these instructions before attempting to
operate this product and save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE

General Safety Rules

1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit (250–300 Lux). Do not use the tool
where there is a risk of causing fire or explosion,
e.g., in the presence of flammable liquids and
gases.
26
3. Guard against electric shock.
Avoid body contact with earthed surfaces (e.g.,
pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions
(e.g., high humidity, when metal swarf is being
produced, etc.), electric safety can be improved
by inserting an isolating transformer or a (FI)
earth-leakage circuit-breaker.
4. Keep other persons away.
Do not let persons, especially children, not
involved in the work, touch the tool or the
extension cord and keep them away from the
work area.
5. Store idle tools.
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
6. Do not force the tool.
It will do the job better and safer at the rate to
which it was intended.
7. Use the right tool.
Do not force small tools to do the job of a heavy
duty tool. Do not use tools for purposes not
intended; for example do not use circular saws
to cut tree limbs or logs.
8. Dress properly.
Do not wear loose clothing or jewellery, as
these can be caught in moving parts. Non-
skid footwear is recommended when working
outdoors. Wear protective hair covering to
contain long hair.
9. Use protective equipment.
Always use safety glasses. Use a face or
dust mask if working operations create dust
or flying particles. If these particles might be
considerably hot, also wear a heat-resistant
apron. Wear ear protection at all times. Wear a
safety helmet at all times.
10. Connect dust extraction equipment.
If devices are provided for the connection
of dust extraction and collecting equipment,
ensure these are connected and properly used.
11. Do not abuse the cord.
Never yank the cord to disconnect it from
the socket. Keep the cord away from heat, oil
and sharp edges. Never carry the tool by its
cord.
12. Secure work.
Where possible use clamps or a vice to hold
the work. It is safer than using your hand and it
frees both hands to operate the tool.