40 | EN
...11.
Software
i
The coloring of the connecting cables does
not correspond to the polarity of the
individual measurement signals, but is
intended as a connecting aid only.
In the example stated above (see
this means that the red cable has to be con-
nected to cylinders 1, 4, and 3, the black
cable to cylinders 6, 2 and 5 (System has two
separate measurement channels). The sig-
nals are then displayed correctly by the sys-
tem on screen.
!
Please note connecting polarity of trigger
clamp (see dots on trigger clamp).
11.7 Compatibility (EMC)
This product is a Class A product in accor-
dance with EN 61 326.
i
This product can cause radio interference
in the home; in this case the operator may
be
asked
to
measures.
11.8 Vacuum waveform
11.8.1 Display functions
•
Vacuum
Waveform—crankshaft
based display of AC vacuum
•
Barchart—percent vacuum per cylinder
with
live,
minimum,
average values
•
Engine RPM and DC vacuum
11.8.2 Measurement functions
•
Engine Analyzer Display Range: 0.1 inHg/
div to 2 inHg/div
•
Selectable Ranges:
-
0.8 inHg - 16 inHg
•
Selectable Trigger Cylinder
•
Voltage
Offset:
between bottom and top of grid
1 689 979 945 (28.07.2006)
Figure
implement
appropriate
angle
maximum,
and
channels
adjustable
11.8.3 Record and storage functions
•
Record and Playback movie of displayed
screens
•
User selectable record time
•
Save and Recall display screens
8)
11.9 Cranking kV test
•
DI (DIST. IGN.), EI (DISTRIBUTORLESS),
and CNP (COIL-NEAR-PLUG) ignition
system support
•
Measure of the secondary ignition firing
voltage during crank cycle
•
Provides simple Pass/Fail results based
on Threshold voltages identified by the
user
•
Selectable 2-12 kVolt threshold setting for
Pass/Fail Identification
•
Barchart
measured
11.10 Help menus
•
Displays information pertaining to present
display screen functionality
11.11 Battery charging feature
•
Displays message when battery state is
low
•
Prevents from overcharging
•
Automatically
preventing excessive battery drain
11.12 Transfer of bitmaps to PC
•
Ability to transfer bitmaps to PC using File
Transfer Utility (FTU)
-
-
-
-
-
•
Data is sent with a Date/Time stamp so
new files do not overwrite existing files.
display
of
live
shuts
Oscilloscope
Ignition Primary/Secondary
Vacuum Waveform
Graphing Multimeter
Cranking kV Test
Robert Bosch GmbH
FSA 450
kV
values
down
tester,