Installing The Ceiling Cover On The Fan Motor Housing; (Close-To-Ceiling) - Luminance Brands Kathy Ireland Home CF835AP00 El Manual Del Propietario

5. Installing the Ceiling Cover on the Fan Motor
Housing
5.1
Remove Three Motor Housing Screws (every other
one) from the top of the Motor Housing (Figure 6) .
Retain the Three Motor Housing Screws for future use .
5.2
Position the Rubber Gasket on the Motor Housing,
Small Holes in Gasket centered over the Screw
Holes in the Housing and the Notched Area of the Rubber Gasket over the Notched Area of the Housing
(Figure 7A & 7B) .
NOTE: The three larger holes in the rubber gasket
will fit around the three screws remaining in the
motor housing.
5.3
Gently pry the Decorative Cap from the Ceiling Cover
(Figure 8) .
(For Close-to-the-Ceiling Mounting)
Figure 6
REMOVE SCREWS (3)
Figure 7A
Figure 8
8
TOP VIEW
GASKET LARGER HOLES (3)
MOTOR HOUSING
DECORATIVE CAP
CEILING COVER
REMOVE
SCREWS (3)
REMOVE 3 MOTOR
HOUSING SCREWS
(every other one)
MOTOR
HOUSING
INSTALL
GASKET
Figure 7B
ETL Model No.: CF835