Luminance Brands Kathy Ireland Home CF835AP00 El Manual Del Propietario página 20

12. Installing the Light Fitter Assembly and Shade
12.7
Position the Shade over the Threaded Nipple and seat
Bowl on Bowl Cap (Figure 31) .
Pass the Fan Pull Chain through the Bushing in the Outer Bowl Cap and install the Cap on the Threaded
Nipple .
Install Finial Nut finger tight .
NOTE: It is advisable to periodically check the
tightness of the finial.
CAUTION
!
Be sure that the fan switch chain does not
make contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch
chain from touching the light bulbs.
12.8
Cut the 3-Speed Switch Pull Chain to a desired length
(optional) . Connect the Pendant (supplied) to the
3-Speed Switch Pull Chain by sliding the Pendant
(small hole first) onto the Pull Chain (Figure 32) .
Attach the Chain Coupler to the end of the Chain and
allow the Pendant to fall down over the Coupler .
Cut the Light Fitter Pull Chain to a desired length
(optional) . Connect the Pendant (supplied) to the
Light Fitter Pull Chain by sliding the Pendant (small
hole first) onto the Pull Chain (Figure 32) . Attach the
Chain Coupler to the end of the Chain and allow the
Pendant to fall down over the Coupler .
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and
operation of this Ceiling Fan .
SHADE
BUSHING
FAN SPEED
PULL CHAIN
Figure 31
FAN SPEED
PULL CHAIN
PENDANT
COUPLING
Figure 32
20
(Cont'd.)
THREADED
NIPPLE
OUTER BOWL
CAP
FINIAL NUT
LIGHT FITTER
PULL CHAIN
LIGHT FITTER
PULL CHAIN
PENDANT
COUPLING
ETL Model No.: CF835