Electrical Requirements; Ceiling Fan Assembly - Luminance Brands Kathy Ireland Home PREMIUM SELECT ECO CF4802AP00 El Manual Del Propietario

Your new Ceiling Fan will require a grounded electrical
supply line of 120 Volts AC, 60 Hz, 15 Amp Circuit .
WARNING
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked "Acceptable
for Fan Support of 22.7kg. (50 lbs.) or less", and use
screws supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are
not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
THE ILLUSTRATIONS MAY NOT DEPICT YOUR EXACT MODEL,
YET ASSEMBLY IS THE SAME FOR EACH MODEL.
3.1
Use Four #10-24 x 12mm Pan Head Screws and Flat
Washers (supplied) to secure Flange to Blade (blades
sold separately) (Figure 1) .
Repeat for the Remaining Four Blades .

2. Electrical Requirements

3. Ceiling Fan Assembly

The Outlet Box must be securely anchored and capable
of withstanding a load of at least 50 Pounds .
If your Fan is to replace an Existing Ceiling Light
Fixture, turn Electricity OFF at the Main Fuse Box at this
time and remove the Existing Light Fixture .
!
To avoid fire or shock, follow all wiring instructions
carefully.
A n y e l e c t r i c a l w o r k n o t d e s c r i b e d i n t h e s e
instructions should be done or approved by a licensed
electrician.
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and operation of this Ceiling Fan .
Figure 1
5
WARNING
#10-24 x 12mm
PAN HEAD
SCREWS
(4 per blade)
(sold separately)
FLAT WASHERS
(4 per blade)
BLADES (set of 5)
(sold separately)
FLANGES
(set of 5)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF4802 and CF4502