Compulsary Inspections And Checks; Storage And Maintenance - Tractel AH2-32 Modo De Empleo

COMPULSARY INSPECTIONS AND CHECKS

Maintenance inspections and operations must be performed by qualified and entitled persons.
Check on start up (or starting back up): in compliance with the national regulations.

Compulsory periodical check in compliance with the national regulations. Recommended

at least every 12 months by TRACTEL SOLUTIONS SAS.
 A thorough examination paying particular attention to any alteration of parts due to an
impact, corrosion, cracking or deformation must be conducted a minimum of twice a year,
every month in the case of heavy-duty use in an aggressive atmosphere.
 TRACTEL SOLUTIONS is at your disposal in order to conduct any regulatory check.
Regularly check the equipment is in perfect working order (before every use), in particular

the hooking ring joint and the screws.
 Perform visual inspection before every use.
 Any part with a defect must be replaced by a TRACTEL SOLUTIONS part.
 Any deformed equipment must be immediately withdrawn from use.
Maintenance inspections and operations must be performed by qualified and entitled persons.
Regularly check the equipment is in perfect working order (before every use), in particular

the semi-automatic system and the pivoting pads.
 Perform visual inspection before every use.
Any part with a defect must be replaced by a TRACTEL SOLUTIONS part.

 The hook has to be stored in an safe place, at ambient temperature
 During the storage, the hook has to be in a stable position without risks of tipping over. On
request, Tractel Solutions supplies appropriate storage supports
Any overloaded equipment must be immediately withdrawn from use.

M 6124 M
GB

STORAGE AND MAINTENANCE

rev 6 – 12/2017
p. 13 / 36