Priority Instructions; Description And Applications Of The Equipment - Tractel CR05 50-100 Modo De Empleo

 Tout cé détérioré doit être immédiatement retiré du service.
 Le cé doit être stocké dans un endroit propre et abrité, à température ambiante
 Durant son stockage, le cé doit être en position stable, sans risque de basculement. Sur
demande, Tractel Solutions propose des supports de stockage adaptés.
Tout matériel ayant subi une surcharge doit être immédiatement retiré du service.
GB
Always concerned to improve the quality of its products, TRACTEL SOLUTIONS S.A.S
reserves the right to modify without notice the specifications of the equipment described in
this manual.
This manual outlines all necessary instructions for the safe and the correct operation of the
TOPAL material.
For safety's sake and efficiency of the equipment, you must become familiar with these
instructions and adhere to them before any use of the equipment.
The clamp can be used only by skilled and entitled personnel
 Never transport people using this equipment or its accessories.
 Never exceed the working load limit WLL (see engraving).
 A minimum load of 5% of the WLL must be respected
 Never weld on the equipment or alter it.
 Never use the equipment for any lifting other than the type it is designed for.
 Never go under the load.
 When laying down a load, the object must be stable before opening the clamp.
 Regularly check the correct condition of the equipment (see Storage & Maintenance
paragraph).
 Lifting and turning operations can only be done when the environment is free of
obstacles
 Only TRACTEL SOLUTIONS spare parts must be used.

DESCRIPTION AND APPLICATIONS OF THE EQUIPMENT

Lifting accessory to lift and turn coils from the internal diameter.
This lifting C-hook is fitted with a guide handle.
The technical sheet T 6035 is at your disposal for technical characteristics and more
Turning coils from the vertical to the horizontal position
1) Swivel the shoe to the front of the hook.
2) Position it under the coil to be lifted (inside the central hole of the coil).
3) Next, lift the hook + coil assembly by moving the crane (see diagram opposite).
4) The hinged shoe of the hook provides gradual and even turning to finish off the
movements of the crane.
M 6114 rev 1 – 01/2010

PRIORITY INSTRUCTIONS

OPERATING INSTRUCTIONS
4