Button Functions - Olympus FL-600R Instrucciones

Button Functions

Button Functions
Button
Adjust fl ash level by up to ±5 EV. This
value is combined with adjustments to
fl ash compensation made using the
camera.
Adjust the angle of illumination
ZOOM
manually. "M" appears in the display.
Manually turn the LED light on or off.
To fi re a test fl ash, press the TEST button while the CHARGE lamp is lit. The
TEST AUTO CHECK lamp blinks for about 5 s to indicate that the fl ash has fi red successfully. If
the lamp does not blink, adjust settings or change the distance to the subject.
The control panel backlight lights for about 15 s. The backlight turns off when camera
BACK
LIGHT
controls are used.
Function
1
Press (H) or ZOOM (G).
2
Rotate the dial.
1
Before shooting, set the LED light to manual.
g "Other settings" (p. 35)
2
Press (I) to turn the LED light on. Press
(I) again to turn the LED light off. To view the
LED brightness setting, press and hold
for 2 s while the LED light is on.
Use
EN
(I)
31