Measuring Ac Voltage - Steren MUL-400 Manual De Usuario

Excepting the AC voltage range and AC current, you must Excepting the AC voltage range and AC current, you must
release the DC / AC button. release the DC / AC button.
L/C Switch
Press L/C button to measure capacitance and inductance.
MEASURING DC VOLTAGE
Warning
You cannot measure a voltage over 1000VDC, if you performs
this action, the meter's internal circuit will be damaged.
1.- Connect the red testing point to the jack signaled "V" and the
black testing point to the jack signaled "COM".
2.- Set the dial to the VDC / VAC setting
3.- Connect the testing points to the equipment to be measured.
4.- Turn the equipment to be measured on, the voltage will
appear on the LCD screen. The polarity will also appear.
5.- When the value to be measured is unknown, set the dial to
the maximum setting.
When a number "1" is displayed in the screen, it indicates When a number "1" is displayed in the screen, it indicates
that exists an over range, please select a higher range. that exists an over range, please select a higher range.

MEASURING AC VOLTAGE

Warning
You cannot measure a voltage over 700VAC, if you performs this
action, the meter's internal circuit will be damaged.
1.- Connect the red testing point to the jack signaled "V" and the
black testing point to the jack signaled "COM".
2.- Set the dial to the VAC / VDC setting. Select the range.
3.- Press D / AC button to change to AC measure mode.
4.- Turn the equipment to be measured on, the voltage will
appear on the LCD screen.
5.- When the value to be measured is unknown, set the dial to
the maximum setting.
When a number "1" is displayed in the screen, it indicates When a number "1" is displayed in the screen, it indicates
that exists an over range, please select a higher range. that exists an over range, please select a higher range.
ENGLISH-9