Troubleshooting - Porter Cable PCC475 Manual De Instrucciones

Sierra alternativa pivotante de 18 v con abrazader
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

• Unit will not start.
Problem
• Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into
• Unit shuts off abruptly.
For assistance with your product, visit our website at www.portercable.com for a list of
service centers, or call the PORTER-CABLE Customer Care Center at (888) 848-5175.
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the
The RBRC™ Seal
LI-ION or NI-CD battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid by
PORTER-CABLE.
RBRC™ in cooperation with PORTER-CABLE and other battery users, has
established programs in the United States to facilitate the collection of spent LI-
ION or NI-CD batteries. Help protect our environment and conserve natural
resources by returning the spent LI-ION or NI-CD battery to an authorized
PORTER-CABLE service center or to your local retailer for recycling. You may also
contact your local recycling center for information on where to drop off the spent battery.
RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.
ACCESSORIES
not been tested with this product, use of such accessories with this tool could be
WARNING:
hazardous. To reduce the risk of injury, only PORTER-CABLE recommended
accessories should be used with this product.
A complete line of accessories is available from your PORTER-CABLE Factory Service
Center or a PORTER-CABLE Authorized Warranty Service Center. Please visit our
Web Site www.portercable.com for a catalog or for the name of your nearest supplier.
PORTER-CABLE will repair or replace, without charge, any defects due to faulty
THREE YEAR LIMITED WARRANTY
materials or workmanship for three years from the date of purchase for tools (two
years for batteries). This warranty does not cover part failure due to normal wear or
tool abuse. For further detail of warranty coverage and warranty repair information,

TROUBLESHOOTING

• Battery pack not installed properly.
Possible Cause
• Battery pack not charged.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
• Hot/Cold Pack Delay.
• Battery pack has reached its
maximum thermal limit.
• Out of charge. ( To
maximize the life of the
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
Since accessories, other than those offered by PORTER-CABLE, have
14
• Check battery pack
Possible Solution
installation.
• Check battery pack
charging requirements.
• Check to see if switch lock
off button is engaged.
charger until green LED
appears.
• Plug charger into a
working outlet. Refer to
"Important Charging Notes"
for more details.
• Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4.5°C) or below
105 degrees F (+40.5°C).
•Allow battery pack to return
to normal temperature.
Charger will then begin to
charge battery.
•Allow battery pack to cool
down.
• Place on charger and
allow to charge.
Tabla de contenido
loading

Este manual también es adecuado para:

Pcl120c

Tabla de contenido