Installing The Light Plate And Glass Lens - Kichler HATTERAS BAY Manual Del Usuario

INSTALLING THE LED LIGHT
PLATE AND GLASS LENS
Step 1. Loosen the three mounting screws on the inside of the light
fixture and "remove" and save the fourth screw. (Fig.19)
Step 2. Hold the light plate close to the light fixture and connect the white
wires from the light plate and the fan. Follow the same procedure with the
black wire connectors: (Fig. 19)
Step 3. Tuck the connections neatly into the light fixture.
NOTE: Be careful not to pinch the light plate wires between the light plate
and the light fixture.
Step 4. Place the light plate key hole slots over the three screws
previously loosened on the light fixture and turn the light plate until it
locks in place at the narrow section of the key hole slots. Tighten the
three key hole screws and replace the fourth screw previously removed
and tighten securely. (Fig. 19)
Carefully lift the light fixture lens onto the lens holder align the edge and
close the light fixture.
NOTE: Make sure to the padlocks and tighten to prevent the lens holder
from coming tumble.(Fig. 20)
16 | KICHLER.COM
Light fixture
LED Light
Wire connector
kit
Mounting screws
Fig. 19
Light fixture
Glass lens
Padlocks
Fig. 20