Kichler HATTERAS BAY Manual Del Usuario página 13

ELECTRICAL CONNECTIONS
(continued)
Step 2. Motor to Receiver Electrical Connections: (Fig. 14) Connect
the black wire from the fan to the black wire marked "TO MOTOR L"
on the receiver. Connect the white wire from the fan to the white wire
marked "TO MOTOR N" on the receiver. Connect the blue wire from
the fan to the blue wire marked "FOR LIGHT" on the receiver. Secure
all the wire connections with the plastic wire nuts provided.
Step 3. (Fig. 14) Receiver to House Supply Wires Electrical
Connections: Connect the black (hot) wire from the ceiling to the black
wire marked "AC in L" from the receiver. Connect the white (neutral)
wire from the ceiling to the white wire marked "AC in N" from the
Receiver. Secure the wire connections with the plastic wire nuts
provided.
Step 4. (Fig. 14) Connect the ground wire (green or bare copper)
from the outlet box to the ground wire on the ceiling mounting bracket
and the ground wire from the ceiling fan. After making all connections,
separate the white and green wire connections to one side and the
black wire connections to the other side of the outlet box.
NOTE: Fan must be installed at a maximum distance of 30 feet from
the CoolTouch™Remote Transmitter for optimal signal transmission
between the transmitter and the fan's receiving unit.
Outlet box
Black (hot)
Green or bare
copper (ground)
Black ("AC IN L")
White ("AC IN N")
Receiver
Black ("to motor L")
White ("to motor N")
Blue (for light)
Ground
(green)
Blue (for light)
Black (motor)
Fig. 14
60" HATTERAS BAY
White (neutral)
(Connect to
ground wire on
hanger bracket
if no house
ground wire
exists.)
White (neutral)
PATIO LED | 13
TM