Installing The Light Kit And Glass - Kichler 56 Verdi LED Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INSTALLING THE LIGHT KIT AND GLASS

NOTE: Before continuing installation, confirm that the power is still turned off
at the main circuit breaker or by removing the correct fuse. Turning the power
off using a wall switch is not sufficient to prevent electrical shock.
Step 1. Hold the light kit close to the switch housing and connect the WHITE
wires from the light kit and fan by pushing the connectors together. Follow the
same procedure with the BLACK wires. (Fig. 20)
Light Kit
Step 2. Tuck the connections neatly into the light kit. Attach the light kit
Screw
to switch housing and securely tighten with three (3) screws found in the
hardware pack.
Fig. 20
Step 3. Secure the glass to switch housing by twisting in a clockwise direction,
twist the glass gradually until it snaps on to the switch housing. Do not over-
tighten. (Fig. 21)
Glass
Fig. 21
14 | KICHLER.COM
Tabla de contenido
loading

Tabla de contenido