Hanging The Fan - Kichler HATTERAS BAY Manual Del Usuario

HANGING THE FAN

NOTE: This ceiling fan is supplied with two types of hanging
assemblies; a downrod and canopy mounting system and a "close to
ceiling" Canopy ONLY system. The "close-to- ceiling" installation is
recommended in rooms with less than 8-foot ceilings or in areas
where additional space is desired from the floor to the fan blades.
Once you have selected which mounting system you will use,
proceed with the following instructions. Where necessary, each
section of the instructions will note the different procedures to follow
for the two types of mounting.
REMEMBER to turn off the power before you begin.
To properly install your ceiling fan, follow the steps below.
Step 1. Pass the 120 volt supply wires from the ceiling outlet box
through the center of the ceiling mounting bracket. (Fig. 5)
Step 2. Attach the ceiling mounting bracket to the outlet box using
the screws and washers included with the outlet box. (Fig. 5)
CUL Listed
outlet box
Ceiling
mounting
bracket
Hook
120V Wires
Fig. 5
60" HATTERAS BAY
Washers
Mounting screws
(supplied with
electrical box)
PATIO LED | 7
TM