Safety Rules - Kichler HATTERAS BAY Manual Del Usuario

SAFETY RULES

1. To reduce the risk of electric shock, ensure electricity has been turned off at
the circuit breaker or fuse box before beginning.
2. All wiring must be in accordance with the National Electrical Code (NEC)
and local electrical codes. Electrical installation should be performed by
a qualified licensed electrician.
3. WARNING: To reduce the risk of fire, electric shock, or personal injury,
use mounting screws provided with the outlet box for mounting to the
outlet box. Most outlet boxes commonly used for the support of lighting
fixtures are not acceptable for fan support and may need to be
replaced. Due to the complexity of the installation of this fan, a qualified
licensed electrician is strongly recommended.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY, MOUNT FAN TO OUTLET BOX MARKED
"ACCEPTABLE FOR FAN SUPPORT".
The outlet box and support structure must be securely mounted and capable
4.
of reliably supporting a minimum of 50 pounds. Use only CUL Listed outlet
boxes marked "FOR FAN SUPPORT".
The fan must be mounted with a minimum of 7 feet clearance from the
5.
trailing edge of the blades to the floor.
To operate the reverse function on this fan, press the reverse button while
6.
the fan is running.
Avoid placing objects in the path of the blades.
7.
4 | KICHLER.COM
8. To avoid personal injury or damage to the fan and other items, be cautious when
working around or cleaning the fan.
9. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth
or lightly dampened cloth will be suitable for most cleaning.
10. After making electrical connections, spliced conductors should be turned upward and
pushed carefully up into outlet box. The wires should be spread apart with the ground
wire and white (common) wire to one side with the black (load) wire to the other side
of the outlet box.
11.
Electrical diagrams are reference only. Light kits that are not packed with the fan
must be CUL Listed and marked suitable for use with the model fan you are installing.
Switches must be CUL General Use Switches. Refer to the Instructions packaged
with the light kits and switches for proper assembly.
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE
BLADE BRACKETS (ALSO REFERRED TO AS FLANGES) DURING
ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN THE
PATH OF THE BLADES.
Special Notice
This appliance is equipped with a "Wattage Limiting Device" required by the
United States Department of Energy. The device has been installed at the
factory and can not be removed.
Installing Lamps in excess of 75 total watts will disable the unit's light fixture. If
this should happen, you will need to reset the lighting fixture by turning the
power off to the ceiling fan and/or light fixture, reinstalling lamps totaling less
that 75 watts and then turning the power back on.