Product Overview - Hilti DSH 700-X Manual De Instrucciones Original

▶ Guide the product smoothly and do not apply lateral pressure to the cutting disc. Always bring the cutting
disc into contact with the workpiece at right angles. Don't attempt to alter the line of cut by applying
lateral pressure or by bending the cutting disc while cutting is in progress.
▶ Abrasive cutting discs which are used for wet cutting must be used up the same day as long periods of
exposure to moisture have a negative effect on the strength of the disc.
▶ Never install a saw blade for cutting wood.
▶ Use only cutting discs that comply with the existing standards for cutting discs.
▶ Prior to installation and before use, check the cutting disc for damage. Do not install a damaged cutting
disc. Comply with the requirements stated by the manufacturer of the cutting disc.
3 Description
3.1

Product overview

3.1.1 Gasoline-powered cut-off saw
6 English
1
Guard
@
Water supply
;
Front grip
=
Water valve
%
Pull start
&
Fuel tank cap
(
Throttle trigger
)
Rear grip
+
Fuel-level sight glass
§
Guide rollers
/
Cutting disc
:
Clamping screw
∙
Clamping flange
$
Spark plug connector
£
Decompression valve
|
Throttle safety grip
¡
Run/stop switch with half-throttle lock
Q
Primer bulb
W
Water connection
E
Grip for guard adjustment
R
Disc direction-of-rotation indicator (arrow at
T
front of guard)
Saw arm
Z
Hole for locking pin for changing cutting
U
discs
Pump cover
I
Air filter cover
O
2271385
*2271385*