Maintenance And Storage - Worx WG505E Traducción De Las Instrucciones Originales

i) If the machine becomes
clogged, shut-off the power
source and disconnect the
machine from supply before
cleaning debris.
j) Never operate the machine
with defective guards or
shields, or without safety
devices, for example debris
collector in place.
k) Keep the power source
clean of debris and other
accumulations to prevent
damage to the power
source or possible fire.
l) Do not transport this machine
while the power source is
running.
m)Stop the machine, and
remove plug from the
socket. Make sure that all
10
moving parts have come to
a complete stop
- Whenever you leave the
machine,
- Before clearing blockages
or unclogging chute,
- Before checking, cleaning or
working on the machine.
n) Avoid using the machine
in bad weather conditions
especially when there is a
risk of lightning.
4) Maintenance and
storage
a) Keep all nuts, bolts and
screws tight to be sure the
appliance is in safe working
condition;
b) Check the debris collector
frequently for wear or
All-in-One Blower/Vac/Mulcher
deterioration.
c) Replace worn or damaged
parts.
d) Use only genuine
replacement parts and
accessories.
e) Store the machine in a dry
place out of the reach of
children.
f) When the machine is
stopped for servicing,
inspection, or storage, or
to change an accessory,
shut off the power source,
disconnect the machine
from the supply and make
sure that all moving parts
are come to a complete
stop. Allow the machine
to cool before making any
inspections, adjustments,
etc. Maintain the machine
with care and keep it clean.
g) Store the machine in a dry
place out of the reach of
children.
h) Always allow the machine
to cool before storing.
i) When servicing the
shredding means be aware
that, even though the
power source is switched
off due to the interlock
feature of the guard, the
shredding means can still
be moved.
j) Never attempt to override
the interlocked feature of
the guard.
5) Additional safety
instructions for
EN