Tabla de contenido
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
If the battery is inserted into the charger
when warm or hot, the CHARGING LED
indicator light on the charger may switch on
and illuminate RED. If this occurs allow the
battery to cool outside of the charger for
approximately 30 minutes.
charger mounting
1. This charger can be installed hanging on a
wall using two #8 screws (not supplied).
2. Locate the placement for the charger to be
wall mounted.
3. If fastening to wood studs use 2 wood screws
(not included).
4. Drill two holes on center 114.3mm apart
ensuring that they are vertically aligned.
5. If fastening to drywall use wall anchors(not
included) and screws to secure the charger to
the wall.
NOTE: If the battery and the charger won't be
used for a long time, please remove the battery
from the charger and pull out the AC power
plug.
imPortant SaFety inStructionS
1. SAVE THESE INSTRUCTIONS - DANGER:
TO REDUCE RISK OF FIRE OR ELECTRIC
SHOCK
CAREFULLY
INSTRUCTIONS.
2. Confirm the voltage available at each country
location before using the charger.
3. If the sharp of the plug does not fit the power
outlet, use an attachment plug adaptor of the
proper configuration for the power outlet.
English (Original Instructions)
Warning
FOLLOW
correct DiSPoSal oF thiS ProDuct:
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible
harm to the environment or human health
from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems
or contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
removal oF WaSte batterieS anD
accumulatorS
Li-ion
Member States shall ensure that manufacturers
design appliances in such a way that waste
batteries and accumulators can be readily
removed. Where they cannot be readily
removed by the end-user. Member States
shall
ensure
appliances in such a way that waste batteries
and accumulators can be readily removed by
qualified professionals that are independent
of the manufacturer. Appliances in which
batteries and accumulators are incorporated
shall be accompanied by instructions on how
those batteries and accumulators can be
safely removed by either the end-user or by
independent qualified professionals. Where
appropriate, the instructions shall also inform the
end-user of the types of battery or accumulator
incorporated into the appliance.
THESE
5
that
manufacturers
design
Tabla de contenido
