Faber PYANA NAUTILUS Manual De Instrucciones página 6

4. CONTROLS
Button Function
A Turns the motor on/off at speed one.
With the motor turned off:
operation of the hood.
With the motor turned off:
continuous operation of the hood.
B Turns the motor on at speed two.
Press and hold the button for approximately 2 seconds, with all the loads
turned off (Motor+Lights), to turn the Activated Charcoal Filter alarm on. LED
(A)
To turn the alarm off, press the button again and hold for at least 2 seconds.
C Turns the Motor on at speed three.
Press and hold the button for approximately 2 seconds, with all the loads
turned off (Motor+Lights), to reset the Filter saturation alarm. LED A
three times.
D Turns the motor on at INTENSIVE speed.
This speed is timed to run for 6 minutes. At the end of this time, the system
returns automatically to the speed that was set before. If it is activated with
the motor turned off, it will switch to OFF at the end of the time. To deactivate
it, press button D once more or press button A.
With all the loads turned off (Motor+Lights), press and hold D for approximately
2 seconds to enable the remote control. Button A
With all the loads turned off (Motor+Lights), press and hold D for approximately
2 seconds to disable the remote control. Button A
E Turns the lights on/off at maximum strength.
5. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
6
A B C
(A).
D E
Led
Fixed.
Flashes once a
second.
Flashes once
every 0.5
seconds.
On.
Flashing.
On.
Flashing.
Flashing.
Flashing.
On.