Veridian Healthcare TENS + Heat Wireless Manual De Instrucciones página 36

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ELECTROMAGNETIC COMPATIBILITY
For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between portable and mobile RF communications equipment and this monitor
This monitor is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The cus-
tomer or the user of this monitor can help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and this monitor as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum
output
150 kHz to 80 MHz
power of
transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be determined
using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures,
objects and people.
36 • ENGLISH
Table 4
Separation distance according to frequency of transmitter
d =
1
2 .
0,12
0,38
1,2
3,8
12
m
80 MHz to 800 MHz
d =
1
2 .
0,12
0,38
1,2
3,8
12
800 MHz to 2,5 GHz
d = 2.3
0,23
0,73
2,3
7,3
23

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

22-033

Tabla de contenido