Installing Remote Battery - Veridian Healthcare TENS + Heat Wireless Manual De Instrucciones

CHARGING THE DEVICE
NOTE: This device offers 3 user modes, 8 pulse modes and 20 levels of
intensity. As such, the power usage and rechargeable battery life will
vary depending on the users specific settings during treatment.
For example, a fully charged device utilizing mid-range intensity and
only the TENS setting battery life may extend to 20 hours of use. The
same setting with the heat function activated may extend to approxi-
mately 3 hours of use.
For maximum effectiveness, monitor the battery life symbol and
charge the device when the battery level graphic is depleted.
BATTERY INSTALLATION—REMOTE
This device requires and includes: 1 CR2032 battery.
1. Slide away the battery cover to open.
2. Install new or remove the expired battery; you
may need a pin or paper clip to pop out the
battery.
3. Replace C2032 battery into the battery compart-
ment, with the plus (+) side facing up. Always use
a new battery.
4. Replace the battery cover.
5. Dispose of batteries according to local regulations.
ENGLISH • 17