Veridian Healthcare TENS + Heat Wireless Manual De Instrucciones página 26

INSTRUCTIONS FOR USE
6. HEAT SETTING— To activate the
HEAT setting, press the 'H' button.
The two far right green light will
indicate which level is active: no
lights–Heat OFF; 1 light–level 1; 2
lights–level 2.
7. TIMER SETTING— The default tim-
er is 30 minutes; the device may
be set to fixed operating times of:
30, 40, 50, 60, 10 and 20 minutes.
While the unit is on/operating ,
press and hold the '–' button for
3 seconds; the timer will switch
to the next preset time in the
sequence –30 minutes (default),
40, 50, 60, 10, 20; as you press and
hold the '–' button, the second green light will flash to indicate
the new timer set - ie it will flash 2x for 20 minutes, 3x for 30
minutes, etc. Release the '–' button when the desired treatment
timer is reached. The unit will automatically shut off when the
timer is done.
26 • ENGLISH
HEAT SETTING
When changing HEAT
setting, the right most
green lights will illumi-
nate indicating which
setting is in use.
The display on the
stimulator will also
change to reflect the
selected mode
TIMER SETTING —When changing TIMER
setting, the second (from the left) green
light will flash indicating which setting is in
use. The display on the stimulator will also
change to reflect the selected mode